Surface Preparation
- Platinum Elastoseal should be applied on a bare concrete, not previously painted.
- Existing paint should be totally scraped off.
- Surface should be clean, free from dirt, oil, grease, lose grit or mortar.
Mixture Preparation
- Mixing ratio; 1:1
- Add slowly the Part A to Part B while continuously stirring to prevent lumping.
- Stir the mixture thoroughly until free of lumps prior to application.
Application
- Theoretical Coverage
- Roller
- Putty Knife
Theoretical Coverage
- 7 to 8 sqm per 4-liters
**Depending on surface texture and porosity
Drying Time
- Touch dry: 1 hour
- Recoating Time: 1 hour
- Hard Dry: Overnight
Pot Life
Mix only enough material to prevent waste.
- Mixture workability: 20 to 30 minutes
- Thinning: Not necessary
Keep the containers in a dry, cool, well ventilated space and away from sources of heat and ignition.
- Containers must be kept tightly closed.
- Handle with care.
- Shelf Life – Under above mentioned conditions, its shelf life is 12 months from the date of manufacture.
